CREST_Shower_Door_Manual_Ver_1_Rev_2

®

PLEASE REVIEW THIS ENTIRE MANUAL PRIOR TO INSTALLATION

1-866-731-2244

CREST

SHOWER DOOR INSTALLATION INSTRUCTIONS

Do Not Return Product to the Store. Contact DreamLine® with any questions

IMPORTANT!

DreamLine

®

reserves the right to alter, modify or redesign products at any time without prior notice for the

purpose of product improvement and customer experience. Please refer to the model’s web page on

DreamLine.com for the latest technical drawings, installation manuals, warranty information or additional

product details.

MODEL #s

SHDR-1760760-##

SHDR-176076G-##

## = finish

01 - Chrome

04 - Brushed Nickel

06 - Oil Rubbed Bronze

09 - Satin Black

G - Gray Glass

CREST Shower Door Manual Ver 1 Rev 2 022020

®

left-hand door installation shown

®

Installation Date

OD Number

(optional)

SKU Number

*found on the shipping box or label

if available.

Purchase Order

Number

Store/Vendor

Purchased From

Installed By:

Record the following purchase information for your records or in the event you need to contact DreamLine

®

:

This model is treated with DreamLine’s

exclusive ClearMax

TM

Glass technology.

This is a specially formulated coating

that prevents the build up of soap and

water spots.

Install the surface with the ClearMax

TM

label towards the inside of the shower.

Please note that depending on the

model, the glass may be coated on

either one or both surfaces.

For best results, squeegee the glass after

each use and dry with a soft cloth.

CREST Shower Door Manual Ver 1 Rev 2 022020

®

Table of Contents

Section Title Page #

ClearMax™ Coating Information —

Warnings and General Preparaton 2

Model Specific Preparation 3

Tools 4

Detailed Diagram of Shower Door Components 5

Parts List 6-7

Installation Steps 8-32

Reversible 18" L-Bar™ and Top SafeStop™ Bumper Installation 22-24

Bottom SafeStop™ Bumpers Installation 25

Bottom Roller Assembly and Door Installation 27-29

Handle and Vinyl Installation 31

Reversible 18" L-Bar™ Fea

ture 33

Product Maintenance 34

Troubleshooting 35

Factory Parts Information 36

CREST Shower Door Manual Ver 1 Rev 2 022020

®

Symbol Legend

!

TIP

NOTE

TIP - for ease of installation.

NOTE - take note of special

feature; additional information.

INCORRECT -

not recommended.

CORRECT -

recommended.

REQUIRED - requires

special attention;

signifies a warning.

Average Installation Time

1.5 hrs

®

WARNING DISCLOSURE STATEMENT

I

MPORTANT

• DreamLine® reserves the right to alter, modify or redesign products any time without

prior notice for product improvement and customer experience. Please refer to the

model’s web page on DreamLine.com for the latest technical drawings, installation

manuals, warranty information or additional product details.

• This product should be installed by someone familiar with the construction re

quirements

for this type of project and the care necessary for the safe installation and operation of

the product.

• The safety of any installation is the responsibility of the installer.

• Professional installation recommended.

(All Models)

• Professional installation required.

(Enigma Series)

• To prevent damage or serious injury, Do Not lean against the installed panel/door/glass.

• To prevent damage or serious injury: Do Not attempt to lift or move a heavy lite of glass

alone. Use an assistant and/or a professional grade glass suction cup.

• The installation of some models may require drilling down into the threshold. Contact the

manufacturer of the base, tub, or threshold materi

al with any questions regarding the

drilling of holes into their product.

• All drawings in this installation manual are for illustrative purposes only and are not drawn

to scale.

T

EMPERED GLASS WARNING

• Your Shower Door Glass Could Shatter Without Warning if Improperly Installed or

Mishandled

• Do Not install or operate a shower door if the glass has chipped corners, slivered edges or

is otherwise damaged and/or has been dropped or banged into a hard surface such as

tile, marble or glass.

• The main causes of tempered glass breakage are:

o Improper handling, storage or installation

o Misuse/abuse

o Lack of maintenance

o Failure to replace damaged glass

o Improper handling during storage, unpacking and installation:

o Corners and edges are the most susceptible area to damage on a lite of tempered

glass and should be protected and handled with care during storage, unpacking,

installation and operation. A concentrated point of pressu

re or impact with a surface

harder than itself may cause the tempered glass to shatter. The tempered glass may

release immediately, within several hours or even days later.

o Incorrect installation of door hardware, rollers, hinges, channels, stopper or glass:

o Improper installation may include: loose hardware and/or lack of proper gaskets

between the hardware and glass. Additionally, improper al

ignment of guide rails, wall

profiles or other hardware during installation or operation may place stress on the

glass edges and cause it to break.

o This product must be installed by a professional and experienced installer familiar with

the safe handling of tempered glass.

o Improper use of this product:

o Aggressively opening or closing the door may cause trauma to the glass, which can

lead to

breakage. This may occur immediately or hours or even days later.

o The shower door hardware and glass should be inspected periodically:

 Instruct the homeowner how to perform a periodic inspection of the shower

hardware and glass - some minor adjustments may be necessary based upon

the use (or misuse) of the shower door. Ensure that the hardware remains tight

and that the door alignment and o

peration are correct. Any adjustments

should be made upon discovery to prevent damage to the product.

 Additional considerations should be given to the installation of frameless

tempered glass products in households with young children or an elderly

person due to an increased chance of improper handling. In such cases,

alternatives such as shower curtains or grab bars should be considered.

GENERAL PREPARATION

• After opening all boxes and packages, read this introduction carefully. Check that all the

items are included in the package by marking off the components on the “Detailed

Diagram of Product Components” page. Examine all boxes and packages for shipping

damage. If the unit has been damaged, has a finishing defect, or is missing parts; please

contact our Customer Support depart

ment within

3 business days of the delivery date. Please note that DreamLine® will not replace any

damaged products or missing parts free of charge after 3 business days or if the

product has been installed. Please contact DreamLine® if you have any questions.

• Please note that you should refer to your local building codes with questions on

installation compliance standards. Building and plumbi

ng codes may vary by

location, and DreamLine® is not responsible for code compliance standards for your

project and will not accept any returns.

• If this unit is going to be installed in a new construction, install all the required plumbing

and drainage before installing the shower. Use a competent and licensed (if required

by local code) plumber for all plumbing installation.

• Make sure that prior to beginning the installation, the surfaces are leveled and solid and

will be able to support the t

otal weight of the unit. Also make sure the walls are at right

angles. Irregular installation surface level, radius corners or improper angle of side walls

will result in serious problems for your installation. Please note that some adjustments

and drilling will be necessary during the installation process.

• Protect all primary surfaces of the product during installation. Never set your glass dow

n

directly onto a tile floor. Leave corner protectors in place until it is necessary to remove

them. Always use a piece of wood or cardboard to protect the bottom edge and corners

of the glass prior to and during installation.

• This unit must be installed upon a finished threshold and against finished walls.

•

DreamLine

®

shower doors are not designed to be installed into a fiberglass surround due

to the radius corners and lack of a solid surface to mount the hardware.

WARNING: TO AVOID THE RISK OF DAMAGE OR INJURY:

• Follow all recommendations and requirements as shown in the installation

instructions.

• Perform a thorough inspection of the glass and all parts for any damage prior to

installation. Any damage to tempered glass can cause breakage.

Do Not install damaged glass!

• Do Not install or operate a shower or tub door if the glass has chipped corners, sl

ivered

edges or is otherwise damaged. Do Not install or operate a shower or tub door that has

been dropped or banged into a hard surface such as tile, marble or glass.

• CAUTION: Contact with any hard surface can damage tempered glass and cause it to

shatter.

• This product uses tempered glass. Glass cannot be cut after it has been tempered.

Do Not attempt to cut tempered glass.

• DreamLine

®

Glass Shower doors, Tub doors, Inline panels, and Return panels can shatter

due to improper handling or lack of maintenance. Conduct periodic inspections of glass

and all parts for possible damage, missing or loose parts.

• Always wear proper safety equipment such as: safety goggles, work gloves and

appropriate footwear during the installation process.

• WARNING. Risk of leakage and/or damage. Follow

all instructions regarding the

application of silicone sealant or . Allow 24 hours for the sealant to cure before the

initial use of the shower or tub product. Follow the silicone manufacturer’s

recommendations regarding the use of their product.

• Thoroughly read these instructions before installing or using this product.

• Leave this manual for the end-user of the product.

CREST Shower Door Manual Ver 1 Rev 2 022020 2

®

!

This product should be installed by someone familiar with the

construction requirements for this type of product and the care

necessary for the safe installation and operation of the product.

Professional Installation

Recommended

!

Certied Professional

®

Model Specific Preparation

REQUIRED:

!

CREST Shower Door Manual Ver 1 Rev 2 022020 3

®

tooltip

*right-hand panel glass installation shown

panel glass

1/2” MAX

1/2”

Max

Contact the manufacturer of the base, tub or threshold

material with any questions regarding the drilling of

holes into their product.

Tile

Acrylic

Tub

TIP

1/2” Out-of-Plumb

Adjustment on the

Panel side only.

Verify threshold and

walls with a level

Threshold must be

level

L R

Door Door

Panel Panel

This model is reversible for right or left-hand door

installation. The left-hand door installation is

shown as an example throughout this manual. For

the right-hand door installation, simply begin on

the opposite wall and reverse the orientation of

the steps shown.

TIP

This manual will describe the

shower door installation using the

Reversible L-Bar™ in the

right-handed orientation (shown

above).

To reverse the L-Bar™ orientation

please refer to page 33.

NOTE

1-3/4”

minimum

threshold

!

Threshold must be level

1-3/4”

minimum

threshold

±

0

.0

±

0

.0

±

0

.0

±

0

.0

This door recommends professional installation. Two installers recommended.

!

up to 1/2” adjustment for overall width

or Out-of-Plumb conditions within the

U-Channel (#09) on the panel side only.

®

Tools

CREST Shower Door Manual Ver 1 Rev 2 022020 4

®

Soft Head

Hammer

Ø1/8"

(3mm)

Drill Bit

Ø5/16"

(8mm)

Ø1/4"

(6mm)

Drill Bit

Mitre SawHacksaw

PencilTape Measure

Professional-grade

Glass suction cup

Level

Drill

Power

Razor Knife

Painter’s Tape

Phillips

Screwdriver

Silicone

Work Gloves

Ø3/16"

(4mm)

Drill Bit

Ø3/8"

(10mm)

Safety Glasses

Unpack your unit carefully and inspect it. Lay it out and identify all parts using the

Detailed Diagram on page 5 and packing list in this manual as a reference. Before

discarding the carton, check for small hardware bags that may have fallen to the

bottom of the box. If any parts are damaged or missing, please contact DreamLine

®

for replacement. The shipping boxes may contain extra parts not used in your model

configuration.

NOTE

Retain these installation instructions for future reference.

3/8” thick

wood/shims

FACTORY PART

NUMBER

ITEM ASSOCIATED

098001 Hex Wrench #2 Guide Rail Insert (#05)

098002 Hex Wrench #2.5 L-Bar™ Set Screw (#02)

098003 Hex Wrench #3 L-Bar™ (#02)

098004 Hex Wrench #4 L-Bar™ (#02) to Top Profile (#01)

098005 Hex Wrench #5 Bottom Roller Assembly (#22)

TOOLS PROVIDED

HEX WRENCH SIZE

TIP

Verify that the correct model size has been ordered; measure the finished opening

before proceeding with the installation.

Confirm that the finished walls are plumb and the threshold is level and pitched into the

shower area.

Cover the shower/tub drain with tape prior to installation to prevent the loss of screws

or small parts.

Use a type of drill bit that is appropriate for drilling into the finished surface material.

Use a good quality waterproof, mildew-resistant 100% silicone.

®

Detailed Diagram of Shower Door Components

CREST Shower Door Manual Ver 1 Rev 2 022020 5

left-hand door installation shown

underside

inside

01

02

05

07

08

09

10

11

21

20

22

15

16

06

®

Parts List

CREST Shower Door Manual Ver 1 Rev 2 022020 6

®

M5 Hex Head Screw

Decorative Cap

Guide Rail Insert

(pre-installed into Item 01)

Bottom Profile

ST4.2×40mm

Countersunk Screw

Wall Anchor

8mm (5/16in)

U-Channel 1” Aluminum

Inline Panel Glass

Door Glass

PVC Glass Spacer 1mm

Top Profile

L-Bar™ Support Bracket

(Reversible)

04

05

03

06

07

08

09

10

11

12

01

02

x1

x8

x4

x1

x2

x4

x1

x5

x1

®

Parts List

CREST Shower Door Manual Ver 1 Rev 2 022020 7

®

Bottom Profile Insert

Handle

Top Profile End Cap

(Left and Right)

Bottom Roller Assembly

Vertical Vinyl Seal

SafeStop™ Bumper

Plate (Top)

SafeStop™ Bumper

Plate (Bottom)

16

17

15

18

19

20

21

22

23

13

x1

x3

x2

x4

x1

x1ea

x2

x1

(pre-installed into Item 01)

ST4.2×25mm

Countersunk Screw

SafeStop Bumper

PVC Insert (Top)

14

x1

PVC Spacer (1mm/2mm)

for Bottom Roller Assembly

24

x2ea

2 mm

1 mm

SafeStop Bumper

PVC Insert (Bottom)

M4×6mm

Countersunk

Hex Head Screw

Left end cap Right end cap

®

Installation Steps

Tools Needed

Parts Needed

CREST Shower Door Manual Ver 1 Rev 2 022020 8

NOTE

Decide on the handing of the shower door based on your bathroom configuration.

The left-hand door installation will be shown as an example throughout this

manual. To reverse the orientation of the L-Bar™ (#02) and Top Guide Rail

Assembly (#01) for a right-hand door installation, refer to page 33.

Top Guide Rail & 18” L-Bar Assembly sideview

Fig 1a

Fig 1b

left-hand door installation shown

02

x1

03

x2

01

x1

4mm

inside

1

®

Tools Needed

CREST Shower Door Manual Ver 1 Rev 2 022020 9

Middle

Bottom

Top

*at model height

________”

W

Fig 2

NOTE

This model will provide up to 1/2” of adjustment for out-of-plumb conditions

within the Vertical U-Channel (#09) on the panel side only.

2

®

Tools Needed

Parts Needed

CREST Shower Door Manual Ver 1 Rev 2 022020 10

!

After determining the handing of the installation:

Only cut from the end of the Bottom Profile (#03)

that will be installed on the door side of the opening.

The length to cut-o of the door side of the Bottom Profile (#03) will be (L):

Finished Opening (W) (-) 1/16” = Finished Cut Length (L)

TIP

Use a metal file to

deburr the cut end

L

OR

!

The Bottom Profile (#06) can be cut from either end depending on the installation.

Do Not cut off more than 2” from the Bottom Profile as this would remove

allowance for the Panel and Door Glass installation.

!

Do Not cut off more than 2”!

Fig 3a

Fig 3b

06

x1

*In this example, the Bottom Profile (#06)

is shown for a right-hand door installation.

*Door End

*Panel End

cut from the door end only

3

®

Tools Needed

CREST Shower Door Manual Ver 1 Rev 2 022020 11

TIP

Mark the position of the Bottom Profile (#06) on the threshold.

Use a tape measure to keep the rail parallel with the outside

edge of the threshold.

Fig 4

4

®

Tools Needed

CREST Shower Door Manual Ver 1 Rev 2 022020 12

NOTE

Fig 5

See NOTE

◾For installation into an Acrylic Threshold:

drill an Ø1/8”(3mm) hole and use the

ST4.2 x 40mm Countersunk Screw (#07)

OR

◾For installation into a Tile Threshold:

drill a Ø3/16”(4.76mm) hole up to the stud,

drill an Ø1/8” (3mm) pilot hole into the stud

and use the ST4.2 x 40mm Countersunk Screw (#07)

5

®

Tools Needed

Parts Needed

CREST Shower Door Manual Ver 1 Rev 2 022020 13

Fig 6a

Fig 6b

underside of

Bottom Profile (#06)

underside

19

x3

6

®

Tools Needed

Parts Needed

CREST Shower Door Manual Ver 1 Rev 2 022020 14

Fig 7

left-hand door installation shown

09

x1

1

2

3

7

®

Tools Needed

Parts Needed

CREST Shower Door Manual Ver 1 Rev 2 022020 15

2” (50.8mm)

Width of

Inline Panel Glass

!

Cut several 2” - 3” pieces of the the PVC Glass Spacer 1mm (#12).

DO NOT install one long continuous piece into the Bottom Profile (#06).

Fig 8b

Fig 8a

12

x1

8

®

Tools Needed

Parts Needed

CREST Shower Door Manual Ver 1 Rev 2 022020 16

left-hand door installation shown

1 2 3

10

x1

01

02

Fig 9

NOTE

The vertical U-Channel (#09) is sent long to accommodate the finished opening

conditions. Mark the U-Channel (#09) flush with the top guide rail and then

cut to size in Step #11.

9

®

CREST Shower Door Manual Ver 1 Rev 2 022020 17

!

Remove the 2” - 3” pieces of the PVC Glass Spacer 1mm (#12) from the Bottom

Profile that were inserted in Step 08. These must be reinstalled before final

installation of the panel glass.

Fig 10

left-hand door installation shown

10

®

Tools Needed

CREST Shower Door Manual Ver 1 Rev 2 022020 18

TIP

Use a metal file to

deburr the cut end

Fig 11

OR

L

(L) = Finished Cut Length (as measured in Step #9)

Parts Needed

09

x1

11

®

Tools Needed

Parts Needed

CREST Shower Door Manual Ver 1 Rev 2 022020 19

NOTE

See NOTE

◾If a stud is present behind the wall:

drill a Ø3/16”(4mm) hole

up to the stud,

drill an Ø1/8” (3mm) pilot hole into the stud

ST4.2 x 40mm Countersunk Screws (#07)

OR

◾If no stud is present behind the wall:

drill a Ø5/16”(7mm) hole and insert the Wall Anchors (#08)

and use the ST4.2 x 40mm Countersunk Screws (#07).

Fig 12

left-hand door installation shown

Cover the bottom profile with tape or

cloth before drilling to prevent debris

from getting into the channel.

1 2 3

07

x8

TIP

12

®

Tools Needed

Parts Needed

CREST Shower Door Manual Ver 1 Rev 2 022020 20

Fig 13a

Fig 13b

left-hand door

installation shown

!

When placing the Door Glass (#11) into the shower

area, confirm the handle holes are on the correct

side. Always use padding to protect the glass and

shower surfaces.

tooltip

Door Glass

11

x1

13

®

CREST Shower Door Manual Ver 1 Rev 2 022020 21

Width of

Inline Panel Glass

01

02

Fig 14a Fig 14b

14

®

Reversible 18” L-Bar™ and Top SafeStop™ Bumper Installation

CREST Shower Door Manual Ver 1 Rev 2 022020 22

Fig 15a

Fig 15b

Reversible 18” L-Bar™ Exploded View

right-hand 18” L-Bar™ installation shown

TIP

To reverse the orientation of the 18” L-Bar™ (#02)

and Top Profile (#01), please refer to page 33.

02.7

02.4

02.6

02.1

02.2

02.5

02.3

Item Item Description Quantity

02.1 Reversible L- Bar™ Adjustable Bracket 1 pc

02.2 Reversible L- Bar™ Wall Bracket 1 pc

02.3 Reversible L- Bar™ Decorative Cover 1 pc

02.4 M6×18 Flat Head Screw 2 pc

02.5 M5×18 Flat Head Screw 2 pc

02.6 M5×8 Flat Set Screw 2 pc

02.7 Reversible L- Bar™ Body 1 pc

L-Bar™ Support Bracket, Reversible

15

®

Tools Needed

Parts Needed

CREST Shower Door Manual Ver 1 Rev 2 022020 23

Ø1/8”

(3.17mm)

drill bit

Fig 16

NOTE

*see NOTE

Do Not fully tighten the Top SafeStop™ Bumper (#13) screw until instructed.

1 2 3 4

5 6

13

x1

19

x1

07

x2

16

®

Tools Needed

Parts Needed

CREST Shower Door Manual Ver 1 Rev 2 022020 24

Fig 17

TIP

Secure the Top Guide Rail assembly to the outside surface of the Panel Glass (#10)

with several pieces of painter’s tape until the silicone fully cures.

NOTE

Tighten the screw before

attaching the

Top SafeStop™ Bumper

PVC Insert(#14).

1 2 3 4

*see

NOTE

14

x1

17

®

Parts Needed

Bottom SafeStop™ Bumpers Installation

CREST Shower Door Manual Ver 1 Rev 2 022020 25

Remove 3M™ Tape

Fig 18

inside

NOTE

The surfaces need to be clean and free of debris before installing the SafeStop™ Bumpers.

!

16

15

x2

The 2 bottom SafeStop™ Bumpers (#15)

must be installed to prevent the Door Glass

from making contact with the walls.

TIP

Thoroughly clean the areas with an alcohol swab prior to install.

Screw installation is optional for the bottom SafeStop™ Bumpers.

18

®

Tools Needed

Parts Needed

CREST Shower Door Manual Ver 1 Rev 2 022020 26

TIP

Use a metal file to

deburr the cut end

Fig 19a

Fig 19b Fig 19c

W

L

Trim the Bottom Channel Insert (#18) to:

W (-) 1/16” = L

OR

!

To avoid glass-to-metal contact, insert a small piece (1/4” +/-) of the

remaining PVC Glass Spacer 1mm (#12) between the end of the

Bottom Channel Insert (#18) and the Panel Glass as shown in Fig 19b.

18

x1

19

®

Tools Needed

Parts Needed

Bottom Roller Assembly and Door Installation

CREST Shower Door Manual Ver 1 Rev 2 022020 27

Fig 20a Fig 20b

Fig 20c

22

x2

It is not necessary to fully disassemble the Bottom Roller Assemblies (#20).

!

5 mm

20

®

Tools Needed

CREST Shower Door Manual Ver 1 Rev 2 022020 28

3/8" Shim

place approx.

24” apart

Fig 21

!

Do Not lift or dislodge

the Top Guide Rail (#01)

when installing the

Door Glass (#11)!

inside

1 2 3 4

5 6

3/8” Shim

!

5 mm

panel

door

21

®

Parts Needed

CREST Shower Door Manual Ver 1 Rev 2 022020 29

If there is a gap found between the Roller (#22)

and Door Glass (#11) notch:

- Insert the provided 1mm or 2mm Shims (#24)

into the gap.

- Use the same amount of shims in both rollers.

- Do Not exceed 3mm of shims per Roller.

Fig 22a

Fig 22b

Max. Door Glass

Height

Min. Door Glass

Height

Door Glass

Too Low !

!

2mm

1mm

inside

24

x2ea

2 mm

1 mm

NOTE

door glass

panel glass

door glass

panel glass

door glass

panel glass

The top edge of the Door Glass (#11)

should extend between 6mm and 10mm

into the Guide Rail Inserts (#05).

22

®

Parts Needed

CREST Shower Door Manual Ver 1 Rev 2 022020 30

Remove 3M™ Tape

Fig 23

inside

left-hand door installation shown

NOTE

*Both the Left- (#21) and Right- (#21) Top Profile End Caps are shipped with the product.

Use the Right Top Profile End Cap for the left-hand door installation as shown.

1 2

Top Profile End Cap

(Left and Right)

21

x1ea

Left end cap Right end cap

*Right end cap

23

®

Tools Needed

Parts Needed

Handle and Vinyl Installation

CREST Shower Door Manual Ver 1 Rev 2 022020 31

Fig 24

Install the Handle (#20) so that the curvature matches

the edge of the Door Glass (#11).

door glass

panel glass

inside

NOTE

3 mm

20

23

x1

24

®

Tools Needed

CREST Shower Door Manual Ver 1 Rev 2 022020 32

Fig 25

!

Allow 24 hours for the silicone to cure before using the shower,

then remove the painter’s tape that is securing the Top Guide Rail.

NOTE

The surfaces need to be clean and free of debris before applying silicone.

24

Hours

25

PVK

®

Reversible 18” L-Bar™ Feature

CREST Shower Door Manual Ver 1 Rev 2 022020 33

1 2 3 4 5

6 7 8

9 10 11 12 13

right-hand

orientation

left-hand

orientation

outside

®

Product Maintenance

CREST Maintenance Checklist

◻ Check that the unit is stable, operates smoothly and that the installation is secure.

◻ Bottom Profile level and tight to the threshold

◻ U-Channel plumb and tight to the wall

◻ Panel Glass secured within the U-Channel

◻ SafeStop™ Bumpers (top/bottom) secured to the wall

◻ L-Bar™ and Top Profile Assembly level and secured to the Panel Glass and wall

◻ All screws are tight

◻ Top Profile End Cap secured to the end of the Top Profile

◻ PVC Glass Spacer 1mm present between the Panel Glass and the end of the Bottom Profile

Insert to prevent glass-to-metal contact

◻ Bottom Roller Assemblies secured tightly to the Door Glass

◻ All bolts are tight

◻ If applicable, Shims are tightly secured within gap between Door Glass notch and Roller

Assemblies

◻ Handle is tightly secured to the Door Glass

◻ Remove Vinyl Seal to inspect the edge of the Door Glass for concealed damage

◻ Damaged glass must be replaced!

◻ Replace damaged or missing vinyl seals

◻ Inspect and replace silicone as necessary to prevent leakage

To maximize the life of your door, it is important to regularly inspect

the glass and other hardware for misalignment, proper attachment,

and/or damage. Contact DreamLine

®

with any questions or concerns.

NOTE

BASES and BACKWALLS: To ensure long lasting life for your acrylic back walls: wipe them off

after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream

based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal

brushes or scrapers that could permanently scratch or dull the surface.

GLASS: To ensure long lasting life for your glass shower products: wipe them off after each use

with a soft cloth. Rinse and wipe off the glass using either a soft cloth or a squeegee to prevent

soap buildup and water spots (Hard water can etch the surface of the glass over time if left to dry).

To prevent scratching the surface: never use abrasive cleaners or cleaning products that contain

scouring agents. Never use bristle brushes or abrasive sponges that may scratch the surface of the

glass.

HARDWARE: To ensure a long lasting finish: wipe off all metal parts after each use with a soft

cloth. Do not use abrasive cleaners or cleaning products containing ammonia, bleach or acid. If

accidentally used, rinse the surface as soon as possible to prevent damage to the finish (peeling or

corrosion). After cleaning the polished finishes, rinse thoroughly and wipe dry with a soft clean-

cloth.

Clean stainless steel surfaces at least once a week. When applying stainless steel cleaner or polish

to stainless steel hardware, work with the grain (not across the grain). Never use an abrasive

sponge or cloth, steel wool or wired brush as these may permanently scratch the surfaces.

CREST Shower Door Manual Ver 1 Rev 2 022020 34

®

Troubleshooting

Prior to contacting DreamLine® Customer Service, please

have the following information readily available:

- Purchase Order Information

- Name, PO Number, Dealer/Vendor Name, etc.

- SKU/Model Number (see Pages 36-37)

- Factory Part Information (see Pages 36-37)

TIP

Problem/Symptom Suggested Solution Page(s)

Missing Parts

•Check all shipping/packaging material for missing parts/components.

•If not found, contact DreamLine Customer Support [1-866-731-2244] to order

factory part replacement.

―—

Bottom Profile (#06) was cut too short or was cut

from the wrong end during installation.

•Contact DreamLine Customer Support [1-866-731-2244] to order factory part

replacement.

―—

Leakage: Bottom Profile (#06)

•Confirm that silicone was properly applied along the entire length of the bottom

rail.

•Confirm that the Bottom Channel Insert (#12) is installed correctly [see Step

19]

•Direct the shower head/water flow away from the area.

•Insufficient silicone application under the Bottom Profile (#06). [see Step 6]

13;26

Leakage: between the Door (#11) and

Panel Glass (#10)

•Vinyl Seal (#23) is missing, broken, or cut too short [see Step 24] 31

Door Glass (#11) experiences grinding or scraping

during use/or operation.

•Check that the Bottom Roller Assemblies (#22) are installed properly onto the

Door Glass (#11) and sit squarely in the Bottom Profile (#03). [see Step 21]

28

Door Glass (#11) is opening or closing on its own •Threshold is out of level. Removal and re-installation may be necessary.

Door Glass (#11) makes direct contact with the wall

•SafeStop™ Bumpers (top/bottom) are not installed.

•SafeStop™ Bumper (top/bottom) is not correctly aligned with the glass

22-25

Door Glass (#11) has excessive play in the Top

Profile(#01)

•Guide Rail Inserts (#05) missing or broken.

•Door Glass sits too low within the Top Profile (#01).

Add the appropriate spacers.

29

Door Glass (#11) sits too high or too low within the

Top Profile(#01)

•Incorrect application of 1mm/2mm Shims (#24) into the Door Glass (#11) [see

Step 22]

•Top Profile (#01) is not fully seated on the Panel Glass(#10) [see Steps 16-17]

23-24;29

Top Profile (#01) is loosely mounted on the Panel

Glass (#10)

•Insufficient silicone application

•Silicone not fully cured

•U-Channel (#09) is too long. [see Steps 15-17]

22-24

Bottom Roller Assembly (#22) are loosely mounted

on the Door Glass (#11).

•Make sure all Roller bolts are tightened [see Fig 21]

•Confirm the vinyl gasket on the Bottom Roller Assembly (#22) is present.

28

L-Bar™ Support Bracket (#02) not installed level with

the panel glass.

•Review the L-Bar™ (#02) and Top Profile (#01) installation steps

•Removal and re-installation may be necessary.

•The L-Bar™ must be installed correctly for the safety of the installation.

22-24

Door Glass (#11) does not slide smoothly through the

Guide Rail Inserts (#05) during operation

•Loosen the L-Bar™ M6 x18 Flat Head screws (#02.4) and use the L-Bar™ M5x8

set screws (#02.6) to adjust the angle of the L-Bar. Tighten the L-Bar™ M6x18

Flat Head Screws (#02.4) to fix the position. Test operation of the door.

22-24

CREST Shower Door Manual Ver 1 Rev 2 022020 35

®

Factory Parts Information

Contact [email protected] for Part replacement, installation assistance or addtional information.

Complete Warranty information is available on DreamLine.com.

BOLD digit indicates finish color:

1 = Chrome

4 = Brushed Nickel

6 = Oil Rubbed Bronze

9 = Satin Black

FACTORY PARTS INFORMATION

ITEM

#

FACTORY PART NUMBER ITEM DESCRIPTION QTY

01

04236011-0904 / 04236041-0904

04236061-0904 / 04236091-0904

Top Profile for 10mm (3/8in) Glass 1 pc

02

07121152 / 07124152

07126152 / 07129152

L-Bar Support Bracket Reversible 18in for 10mm (3/8in) Glass 1 pc

03

095205

M5 Hex Head Screw

2pcs

04

0755

1

136 / 0755

4

136

07556136 / 07559136

Decorative Screw Cap 4 pcs

05

07550133 Guide Rail Insert (pre-installed into Top Profile) 4 pcs

06

04237011-1524 / 04237041-1524

04237061-1524 / 04237091-1524

Bottom Profile 1 pc

07

092108

ST4.2×40mm Countersunk Screw 9 pcs

08 07552148 Wall Anchor 8mm (5/16in) 3 pcs

09

04154011-1930 / 04154041-1930

04154061-1930 / 04154091-1930

U-Channel 1" Aluminum for 10mm (3/8in) Glass 1 pc

10

10036001 Inline Panel Glass (Clear) 1 pc

11

10036002 Door Glass (Clear) 1 pc

12

07550134

PVC Glass Spacer 1mm 1 pc

13

07021191 / 07024191

07026191 / 07029191

SafeStop™ Bumper Plate (Top) 1 pc

14

07050135 SafeStop™ Bumper PVC insert w/Adhesive (Top) 1 pc

15

07021193 / 07024193

07026193 / 07029193

SafeStop™ Bumper Plate (Bottom) 2 pcs

16

07050132 SafeStop™ Bumper PVC insert w/Adhesive (Bottom) 2 pcs

17

094214

M4x6mm Countersunk Hex Head Screw

4 pcs

18

04238011-887 / 04238041-887

04238061-887 / 04238091-887

Bottom Profile Insert 1 pc

19

092105 ST4.2×25 Countersunk Screw 3 pcs

20

07221089 / 07224089

07226089 / 07229089

Back-to-Back Rectangular Slide Handle 1 pc

21a

07551137

Top Profile End Cap, Right 1 pc

21b

07551144 Top Profile End Cap, Left 1 pc

22

07321031 / 07324031

07326031 / 07329031

Bottom Roller Assembly for 10mm (3/8in) Glass 2 pcs

23

063004100-1886

Vinyl Seal with a Flexible Fin for 10mm (3/8in) Glass 1 pc

24a

07550152

PVC Spacer 1mm for Bottom Roller 2 pcs

24b

07550153 PVC Spacer 2mm for Bottom Roller 2 pcs

CREST 60×72 SHDR-1760760-##

rail.

19]

•Direct the shower head/water flow away from the area.

are not installed.

missing or broken.

Step 22]

•Insufficient silicone application

•Silicon

e not fully cured

•Make sure all Roller bolts are tightened [see Fig 21]

installation steps

•Removal and re-installation may be necessary.

CREST Shower Door Manual Ver 1 Rev 2 022020 36

®

Factory Parts Information

Contact [email protected] for Part replacement, installation assistance or addtional information.

Complete Warranty information is available on DreamLine.com.

BOLD digit indicates finish color: 9 = Satin Black

FACTORY PARTS INFORMATION

ITEM

#

FACTORY PART NUMBER ITEM DESCRIPTION QTY

01

04236091-0904PF Top Profile for 10mm (3/8in) Glass 1 pc

02

07129152

L-Bar Support Bracket Reversible 18in for 10mm (3/8in) Glass 1 pc

03

095205 SCREW, SH, M5

2pcs

04

07559136 Decorative Screw Cap 4 pcs

05

07550133 Guide Rail Insert (pre-installed into Top Profile) 4 pcs

06

04237091-1524PF Bottom Profile 1 pc

07

092108

ST4.2×40mm Countersunk Screw 9 pcs

08 07552148 Wall Anchor 8mm (5/16in) 3 pcs

09

04154091-1930PF

U-Channel 1" Aluminum for 10mm (3/8in) Glass 1 pc

10

10036003 Inline Panel Glass (Gray) 1 pc

11

10036004 Door Glass (Gray) 1 pc

12

07550134 PVC Glass Spacer 1mm 1 pc

13

07029191

SafeStop™ Bumper Plate (Top) 1 pc

14

07050135 SafeStop™ Bumper PVC insert w/Adhesive (Top) 1 pc

15

07029193 SafeStop™ Bumper Plate (Bottom) 2 pcs

16

07050132 SafeStop™ Bumper PVC insert w/Adhesive (Bottom) 2 pcs

17

094214

M4x6mm Countersunk Hex Head Screw

4 pcs

18

04238091-0887PF Bottom Profile Insert 1 pc

19

092105 ST4.2×25 Countersunk Screw 3 pcs

20

07229089

Back-to-Back Rectangular Slide Handle 1 pc

21a

07551137 Top Profile End Cap, Right 1 pc

21b

07551144 Top Profile End Cap, Left 1 pc

22

07329031 Bottom Roller Assembly for 10mm (3/8in) Glass 2 pcs

23

063004100-1886 Vinyl Seal with a Flexible Fin for 10mm (3/8in) Glass 1 pc

24a

07550152

PVC Spacer 1mm for Bottom Roller 2 pcs

24b

07550153

PVC Spacer 2mm for Bottom Roller 2 pcs

CREST 60×72 SHDR-176076G-##

CREST Shower Door Manual Ver 1 Rev 2 022020 37

®

TEL: 866-731-2244

FAX: 866-857-3638

DREAMLINE.COM

For more information on DreamLine

®

Shower Doors and Enclosures please visit DreamLine.com

®