WALL
7834 C.F. Hawn Freeway,
Dallas, Texas 75217 | 1.800.933.TILE
To view the complete collection of
Daltile
®
products and information,
visit our website at daltile.com. ©2020 Daltile (3/20)
WALL
MYTHOLOGY
™
GLAZED CERAMIC WALL TILE & MOSAIC
SIZES
Thickness
Sq. Ft./
Carton
Pieces/
Carton
4 x 12
Wall Tile
Undulated
(4-1/4" x 12-7/8")
(10.91 cm x 32.77 cm)
5/16" 10.64 28
4 x 12
Wall Tile
Wave Crest
(4-1/4" x 12-7/8")
(10.91 cm x 32.77 cm)
3/8" 8.36 22
6"
Arabesque
(5-1/4" x 6")
(13.33 cm x 15.24 cm)
5/16" 10.80 90
2 x 5
Picket Mosaic
(12-1/4" x 11-1/8" Sheet)
(31.12 cm x 27.94 cm Sheet)
Dot-mounted
1/4" 8.76 12
APPLICATIONS
Target
DCOF wet
Suitable
Dry & Level – Interior Floor N/A
Wet & Level – Interior Floor ≥ 0.42
Shower Floors (Residential or Light Commercial) ≥ 0.42
Exterior Floor Applications
(including pool decking & other
wet areas with minimal footwear)
≥ 0.60
Ramps & Inclines ≥ 0.65
Walls/Backsplashes N/A
Countertops N/A
Pool Linings N/A *
A DCOF value of ≥0.42 is the standard for tiles specified for level interior spaces
expected to be walked upon when wet, as stated in ANSI A137.1-A326.3. For more
information about DCOF and the DCOF AcuTest
™
, visit daltile.com/DCOF.
APPLICATION NOTES:
Wall tile and mosaic are suitable for exterior applications in non-freezing climates, when
proper installation methods are followed.
* Mosaics only
INSTALLATION
Grout Joint Recommendation Shade Variation
Wall (4 x 12 Undulated): 1/16" (1/8"
when installed in a staggered brick-
joint pattern; overlap should not
exceed 33%.)
Wall (4 x 12 Wave Crest): 1/16"
(Straight Joint Installation only)
6" Arabesque: 1/16"
Mosaic: 1/8"
Low (V1)
PERFORMANCE CHARACTERISTICS
ASTM#
Wall
Result
Mosaic
Result
Water Absorption C373 < 20.0% < 3.0%
Breaking Strength C648 120-230 lbs 250 lbs
Scratch Hardness MOHS 4.0-6.0 4.0-6.0
Chemical Resistance C650 Resistant Resistant
For additional information on test results, visit us at:
daltile.com/information/TestResults.
NOTES
Since there are variations in all fired ceramic and natural products,
tile and trim supplied for your particular installation may not match
samples. Final confirmation should be made from actual tiles and
trim prior to installation. Manufactured in accordance with ANSI A137.1
standards.
Not for use on ramps. Water, oil, grease, improper drainage and
certain footwear can create slippery conditions. Floor applications
expected to be exposed to these conditions require extra caution in
product selection.
For additional information refer to “Factors to Consider” at:
daltile.com/Factors.
Random visuals enhance the natural beauty of this product. To
achieve optimal results, all tile should be selected from multiple
cartons and shading and graphic arrangement planned prior to
installation.
Special care should be taken when grouting with dark pigmented
colors. A grout release is recommended to prevent finely powdered
pigments from lodging in the pores of the surface. Use of a latex
modified thin-set is recommended for installation.
TRIM
Type Number Size
Pieces/
Carton
12" Jolly S-1/212J 1/2 x 12 12
POST-CONSUMER
RECYCLED MATERIALS
PRE-CONSUMER
RECYCLED MATERIALS
All or select items within this series meet the requirements for these
qualifications. For more information, visit daltile.com.