4
5
*
UQKfNSDaJq:;{[ .-4
*
U2QKfNSDJq:;{[ .4
4
Miniature Through/Ground (Earth) Conductor and
4
Terminal Blocks 2.5 mm
2
/AWG 12 for DIN 15 Rail,
Series 264
4-conductor ground (earth) term. bl., for DIN 15 rail
green-yellow 264-727 100
green-yellow
4
264-727/999-950 100
Item Pack. unit
No. pcs
4-conductor through terminal blocks,
for DIN 15 rail
grey 264-721 100
blue 264-724 100
orange 264-726 100
light grey
4
264-220 100
2-conductor through terminal blocks, for DIN 15 rail
grey 264-701 100
blue 264-704 100
orange 264-706 100
light grey
4
264-120 100
Item Pack. unit
No. pcs
Item Pack. unit
No. pcs
End and intermediate plate, 4 mm /0.157 in thick
orange 264-369 25
grey 264-368 25
light grey 264-370 25
Separator for EEx e/EEx i applications,
4 mm/0.157 in thick
66 mm/2.598 in wide
orange 264-367 25
Comb type jumper bar
, insulated,
I
N
16 A, grey
2-way 264-402 200 (8 x 25)
reduce wire
to 1.5 mm
2
/AWG 16 max.
Alternate comb type jumper bar, insulated,
I
N
= I
N
of terminal block
for 2-conductor terminal blocks
2-way 281-492 100 (4 x 25)
Alternate comb type jumper bar, insulated,
I
N
= I
N
of terminal block
for 4-conductor terminal blocks
2-way 280-492 200 (8 x 25)
Test plug modul, modular, see also page 10.15
test current 0.5 A/6 A
➌
for 2-conductor terminal blocks
6 mm wide
249-136 100 (4 x 25)
test voltage 400 V/48 V
➌
for 4-conductor terminal blocks
10 mm wide
249-139 100 (4 x 25)
test voltage 800 V/48 V
➌
Test plug,
with
cable 500 mm /1’7.7’’
2 mm Ø, red
210-136 50 (5 x 10)
2,3 mm Ø, yel.
210-137 50 (5 x 10)
Operating tool, insulated,
for comp type jumper bar
2-way 280-432 1
Miniature WSB quick marking card,
10 strips with 10 markers each,
white with black printing
see section 14
Screwless end stop, for DIN 15 rail
6 mm wide 249-101 25
Carrier rail DIN 15,
15 x 5.5 mm/0.59 x 0.217 in, 1 mm /0.039 in
thick, acc. to DIN EN 60715, steel, zinc
plated a. yellow chromated, 2 m /6’6’’ long
slotted 210-111 1
Carrier rail DIN 15,
15 x 5.5 mm/0.59 x 0.217 in, 1 mm /0.039 in
thick, acc. to DIN EN 60715, steel, zinc
plated a. yellow chromated, 2 m /6’6’’ long
unslotted 210-295 1
Carrier rail DIN 15,
15 x 5.5 mm/0.59 x 0.217 in/ 1 mm /0.039 in
thick, acc. to DIN EN 60715, aluminum,
2 m /6’6’’ long
unslotted 210-296 1
Item Pack. unit
No. pcs
* For further approvals with corresponding ratings see section 15.
<__ 32 mm /1.26 in __><__ 32 mm /1.26 in __>
<__ 32 mm /1.26 in __>
Application notes
Accessories series 264 for DIN 15 rail
➊
800 V = rated voltage
8 kV = rated surge voltage
3 = pollution degree
(see also section 15)
Suitable for EEx i applications
4
Suitable for EEx e II applications
0.5 – 2.5 mm
2
AWG 20 – 12
750 V~, 23 A
(see also section 13)
➌
Test current in case of touch contacting 0.5 A max.,
6 A if the test pins are firmly connected in the
clamping units.
Max. test voltage 400 V/800 V only in test equip-
ment, respecting relevant air and creepage
distances. In case of touch contacting the max. test
voltage must not exceed 48 V, test pins are not
touchproof.
➍
For marking possibilities
see section 14.
Direct printing of assemblies
contact factory.
Testing with touch contact at the CAGE CLAMP
®
connection made of spring steel –
limited to a current of 0.5 A max.
Testing using CAGE CLAMP
®
connection on the current
bar – max. nominal current 6 A.
The CAGE CLAMP
®
clamps individual test contacts.
<__
24.5 mm /
__>
0.96 in
<_
24.5 mm /
_>
0.96 in
0.08 – 2.5 mm
2
AWG 28 – 12
800 V/8 kV/3
➊
600 V, 20 A U
24 A 600 V, 20 A 2
Terminal block width 6 mm / 0.236 in
L 8 – 9 mm / 0.33 in
2 x 0.08
– 2.5 mm
2
2 x AWG 28 – 12
800 V/8 kV/3
➊
600 V, 20 A U
24 A 600 V, 20 A 2
Terminal block width 10 mm / 0.394 in
L 8 – 9 mm / 0.33 in
<__
24.5 mm /
__>
0.96 in