253
www.wago.com
15,4
27,2
0,6/1,2
33,2
4,9
3,5
7
3,5
7
3,5 4,5
Modular terminal blocks and terminal strips with snap-in mounting
feet
2-pole Pole number > 2
WAGO Rail-Mount Terminal Blocks and Connectors
Volume 1, Section 4 | WAGO Mini Rail-Mount Terminal Blocks TOPJOB®S
1 (1.5)mm²; 2050 Series
Miniature Through Terminal Block TOPJOB®S; with Snap-In Mounting Foot
2-conductor miniature through terminal block; with
snap-in mounting foot; for 0.6 … 1.2mm plate thickness;
3.5mm mounting hole diameter; also for aluminum
DIN-rail (210-154) or with mounting foot (209-120) for
DIN-35 rail
Color Item No. Pack. Unit
gray 4 2050-311 4
100
blue 4 2050-314 3 4
100
green-yellow 4 2050-317 4
100
2-conductor miniature through terminal block; center
terminal block; without snap-in mounting foot; without
mounting ange; for 0.6 … 1.2mm plate thickness;
required between end plate and end terminal block for
terminal strips with mounting anges
gray 4 2050-321 4
100
blue 4 2050-324 3 4
100
green-yellow 4 2050-327 4
100
Accessories; 2050 Series
Appropriate marking systems:
WMB/WMB Inline/Marking strips
End plate; for terminal blocks with snap-in mounting foot;
3.4mm thick
gray 2050-391 100 (25)
Push-in type jumper bar; insulated; I
N
14 A; light gray
2-way 2000-402 25
3-way 2000-403 25
4-way 2000-404 25
5-way 2000-405 25
6-way 2000-406 25
7-way 2000-407 25
8-way 2000-408 25
9-way 2000-409 25
10-way 2000-410 25
Push-in type jumper bar; insulated; I
N
14 A; light gray
1 to 3 2000-433 25
1 to 4 2000-434 25
1 to 5 2000-435 25
1 to 6 2000-436 25
1 to 7 2000-437 25
1 to 8 2000-438 25
1 to 9 2000-439 25
1 to 10 2000-440 25
Delta jumper; insulated; I
N
=I
N
terminal block; light gray
1-2 3-4 5-6 2000-406/020-000 25
Star point jumper; insulated; I
N
=I
N
terminal block; light
gray
1-3-5 2000-405/011-000 25
Push-in type wire jumper; insulated; 0.75mm² conductor
cross-section; I
N
9 A
L = 60mm 2009-402 100 (10)
L = 110mm 2009-404 100 (10)
L = 250mm 2009-406 100 (10)
Protective warning marker; with black high-voltage
symbol; for 5 terminal blocks
yellow 2000-115 100 (25)
Accessories; 2050 Series
Appropriate marking systems:
WMB/WMB Inline/Marking strips
Modular connector; snaps together; for jumper contact slot
Terminal block width: 5mm / 0.197 inch
Only for test purposes
gray 2000-511 100 (25)
Modular connector; snaps together; for jumper contact slot
Only for test purposes
gray 2000-510 100 (25)
Spacer module; snaps together; bridges commoned
terminal blocks
gray 2000-549 100 (25)
Test plug; with 500mm cable; 2mm Ø; max. 42V
red 210-136 50
Aluminum DIN-rail; 1000mm long; 18mm wide; 7mm
high
210-154 1
Plastic end stop; with WSB marker slot; for aluminum
DIN-rail (210-154); 6mm wide
209-122 25
Mounting foot; for DIN-35 rail; snaps onto terminal blocks
with snap-in mounting foot; 6.4mm wide
gray 209-120 25
Mounting screw; for mounting foot (209-120)
209-119 500 (50)
Mounting adapter; for DIN-35 rail; can be used as end
plate; 6.5mm wide
gray 209-137 25
Technical Data
0.14 … 1 (1.5)mm² 1
24 … 16AWG
500V/6kV/3 2 300V, 10AU
I
N
13.5A (17.5A)
300V, 10A2
Terminal block width: 3.5mm / 0.138 inch
L 9 … 11mm / 0.35 … 0.43inch
1
Conductor range: 0.14…1.5mm² “s+f-st”;
Push-in termination: 0.5…1.5mm² “s” and
0.5…0.75mm² “insulated ferrules; 10mm”
Depending on the conductor characteristic, a conduc-
tor with a smaller cross section can also be inserted
via push-in termination.
2
500V = rated voltage
6kV = rated impulse voltage
3 = pollution degree
(see Section 15)
3
Terminal blocks with a blue insulated housing are
suitable for Exi applications.
4
Terminal blocks with an Ex mark are suitable for ExeII
applications.
352V; 13.5A
12A jumper
(see Section 15)
Please observe the application notes:
Jumpers, from page 174
Testing accessories, from page 168
Marking, from page 640
Approvals and corresponding ratings,
visit www.wago.com
WAGO Rail-Mount Terminal Blocks TOPJOB®S
Dimensions (inmm):
4