WAGO Kontakttechnik GmbH & Co. KG
8
Printview: 2-conductor through terminal block - Item No.: 280-901
Accessories
General accessory
Item no. Description Pack. unit (Sub Pack)
209-100 Collective carrier for adjacent jumpers; suitable for 279 to 284 Series adjacent jumpers, 215
Series banana plugs
25
209-106 Mounting carrier; for isolated mounting on DIN 35 rails 25
209-128 Double marker carrier; for center I/O marking of the module; suitable for WSB and WMB
marking
100
209-130 Operating tool; suitable for 264, 280 and 281 Series; 1-way; of insulating material 1
209-140 Group marker carrier; for up to 3 WMB markers or 8 branche markers; 15 mm wide; for
terminal block width 4 - 6 mm; for jumper contact slots of rail-mounted terminal blocks
25
209-141 Group marker carrier; for up to 2 WMB markers or 5 branche markers; 10 mm wide; for
terminal block width 4 - 6 mm; for jumper contact slots of rail-mounted terminal blocks
25
209-142 Group marker carrier; for up to 1 WMB marker or 2 branche markers; 5 mm wide; for terminal
block width 4 - 6 mm; for jumper contact slots of rail-mounted terminal blocks
25
209-170 Test plug adapter; 8.3 mm wide; for test plug 4 mm Ø; suitable for 1.5 mm² - 10 mm² terminal
blocks
25
209-196 Spare fixing/retaining screw; for cover 25
210-186 Stickers for operating instructions; for front-entry rail-mounted terminal blocks; 279 to 285
Series
100
210-549 Spare knurled nut; for cover 25
210-657 Operating tool with partially insulated shaft; blade (3.5 x 0.5) mm; short; suitable for 260, 261,
262, 264, 270, 280, 281, 869, 870 and 880 Series
1
210-658 Operating tool with partially insulated shaft; blade (3.5 x 0.5) mm; short; angled; particularly
suitable for 280 Series actuator and sensor terminal blocks and also for Series 260, 261,
262, 264, 280, 281, 869, 870, 880, 2002,
1
210-720 Operating tool with partially insulated shaft; Type 2, blade (3.5 x 0.5) mm; suitable for 260,
261, 262, 264, 270, 280, 281, 290, 775, 776, 777, 769, 780, 781, 869, 870, 880, 2002, 2003,
2004, 2005 and 2022 Series
1
231-155 Testing plug module with contact stud; for 280, 736, 737, 738, 780 series; pin spacing 5 mm /
0.197 in; CAGE CLAMP®CONNECTION
100
249-105 Pivoting group marker carrier 25
249-106 B-type test plug module; modular; Module width 5 mm 25
249-107 B-type spacer module; modular; e.g., for bridging commoned terminal blocks; Module width 5
mm
25
249-130 Syringe; Contents: 20 ml Alu-Plus contact paste 5
249-141 L-type test plug module; modular; with spring-loaded contact pin; center module 25