HydroMassage • JTL Enterprises, Inc.
15395 Roosevelt Blvd • Clearwater, FL 33760 USA • 1-727-536-5566 • Fax 1-727-536-6633
www.HydroMassage.com • [email protected]
HydroMassage Electrical Requirements – 60Hz, USA and Canada
Technical Specifications
MODEL
IMAGE
SPECS
WEIGHT
WATER
VOLTAGE
PHASE
Amps
440X /
450X
Lounge
91” L x 32”
W x 46” H
285 lbs
empty. 385
lbs with water
12 gallons
distilled
water
208-240
Volts
Single
30
Amp
340 / 350
Series
Bed
91” L x 39”
W x 26” H
260 lbs
empty. 500
with lbs water
30 gallons
distilled
water
208-240
Volts
Single
30
Amp
Electrical Requirements
Series 300-400 Models *these items are required for EACH HydroMassage unit
• A: 208-240 Volt, single-phase, dedicated line with a 30 Amp dedicated breaker and 10-gauge
wire (2 hot legs and a ground*). Install 6” above the floor. on diagram
o 30 Amp, 250 Volt NEMA L6-30R Locking Receptacle (three prong plug).
• B: CAT-5 or CAT-6 terminated network jack (able to connect to network room). on diagram
• C: For use with external timer ONLY (ex. T-Max): 110 Volt outlet required. Install 6” above floor.
on diagram
Electrical Wiring Diagrams
Unique set of items A, B, C required FOR EACH HydroMassage unit (i.e. must install additional sets if a
second or third unit is to be installed in the same room). If necessary, location of outlets above may be
moved within +/- 5”. Call 1-727-536-5566 for details.
Water Requirements Distilled water required. Distilled water is available major supermarkets or
directly from a water supplier (water delivery service).
NEMA L6-30R
Locking
Receptacle
X
Y
G
Top down view of Bed
(not to scale)
C
B
Foot
End
Head
End
A
6”
C
12”
C
12”
C
Top down
view of
Lounge
(not to
scale)
C
B
Foot End
Head End
A
6”
C
6”
C
A
C
B
HydroMassage • JTL Enterprises, Inc.
15395 Roosevelt Blvd • Clearwater, FL 33760 USA • 1-727-536-5566 • Fax 1-727-536-6633
www.HydroMassage.com • [email protected]
HydroMassage Electrical Requirements – 50Hz, Europe & Other Countries
Technical Specifications
MODEL
IMAGE
SPECS
WEIGHT
WATER
VOLTAGE
PHASE
Amps
440X /
450X
Lounge
231cm / 91” L
81cm / 32” W
117cm / 46” H
129 kg / 285
lbs empty.
175 kg / 385
lbs with water
45 L / 12
gallons
distilled
water
230 Volts /
50 HZ
Single
16
Amp
340 / 350
Bed
231cm / 91” L
99cm / 39” W
66cm / 26” H
118kg / 260
lbs empty.
227kg / 500
lbs with water
114 L / 30
gallons
distilled
water
230 Volts /
50 HZ
Single
16
Amp
Electrical Requirements
Series 300-400 Models *these items are required for EACH HydroMassage unit
• A: 230 Volt, single-phase, dedicated line with a 16 Amp dedicated slow blow
Type C or K breaker and 2,5mm
2
wire (1 hot, 1 neutral, 1 ground*). Install 15cm
above the floor. on diagram. Install an RCD or GFIC if required by local code
• B: CAT-5 or CAT-6 terminated network jack (able to connect to front desk PC). on diagram
• B: For use with external timer ONLY (ex. key fob-reader), 230 Volt, 13 Amp outlet required.
Install 15cm above floor. on diagram.
• D: For use with External Cooling System ONLY. 230 Volt, 13 A outlet. Pulls 6 Amps. Install
15cm above floor. on diagram (350, 450X models only).
Electrical Wiring Diagrams
Unique set of items A, B, C required FOR EACH HydroMassage unit. If necessary, location of outlets
above may be moved within +/- 13cm. Call +1-727-536-5566 for details.
Water Requirements Distilled water required. Distilled water is available major supermarkets or
directly from a water supplier (water delivery service).
Top down view of Bed
(not to scale)
C
B
Foot
End
Head
End
A
15
cm
15 cm
C
15 cm
C
Top down
view of
Lounge
(not to
scale)
C
B
Foot End
Head End
A
15
cm
15
cm
C
A
B
C
15
cm
C
D
D
D
15 cm
C
