Page 3 of 6
TEC 700 CONTRACT MULTIPURPOSE
Print Date: 04-08-2015 828417PM
SAFETY DATA SHEET
______________________________________________________________________________
*This product contains one or more materials that may be hazardous when present as an airborne dust. During normal handling of the product, the
material is encapsulated within the product and will not present an exposure risk. Once the product has reached its final state and is abraded or
disturbed, dusting and exposure may occur.
ENGINEERING CONTROL METHODS:
VENTILATION: Use local exhaust ventilation or other engineering controls to
minimize exposures.
EYE PROTECTION: Wear safety glasses when handling this product.
SKIN PROTECTION: Not normally required. Wear chemically resistant gloves to prevent
prolonged or repeated contact.
GLOVES: Nitrile
RESPIRATORY PROTECTION: Respiratory protection may be required to avoid overexposure when
handling this product. Use a respirator if general room ventilation is
not available or sufficient to eliminate symptoms.
Respirators should be selected by and used following requirements
found in OSHA's respirator standard (29 CFR 1910.134).
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Semi-solid
COLOR: Tan
ODOR: Slight Aromatic
ODOR THRESHOLD: Not established
pH: 9.9
FREEZING/MELTING POINT (deg. C): Not established
BOILING POINT (deg. C): Not established
FLASH POINT: Non flammable
EVAPORATION RATE: Not established
FLAMMABILITY: Not a flammable solid or gas
UPPER EXPLOSIVE LIMIT (% in air): Not established
LOWER EXPLOSIVE LIMIT (% in air): Not established
VAPOR PRESSURE (mm Hg): Not established
VAPOR DENSITY: Not established
WEIGHT PER GALLON (lbs.): 9.80
SPECIFIC GRAVITY: 1.170
SOLUBILITY: Not established
OCTANOL/WATER COEFFICIENT: Not established
AUTOIGNITION TEMPERATURE: Not established
DECOMPOSITION TEMPERATURE: Not established
VISCOSITY: No data available.
SOLIDS (% by weight): 55.5
VOC, weight percent 0.00
VOC, U.S. EPA Method 24, less water and exempt
solvents (theoretically determined)
0g/liter of material
SECTION 10: STABILITY AND REACTIVITY
STABILITY: Stable under normal conditions.
CHEMICAL INCOMPATIBILITY: Not established
HAZARDOUS POLYMERIZATION: Will not occur.
HAZARDOUS DECOMPOSITION PRODUCTS:
Carbon monoxide, carbon dioxide Nitrogen
containing gases